This position serves as an Airports District Office (ADO) senior Civil Engineer and lead project engineer for the Office of Airports (ARP), ASO Region, in support of the Airport Improvement Program (AIP). The ARP serves as the principal Federal Aviation Administration (FAA) organization responsible
JSfirm
Civil Engineer (Lead)
Job Description:

This position serves as an Airports District Office (ADO) senior Civil Engineer and lead project engineer for the Office of Airports (ARP), ASO Region, in support of the Airport Improvement Program (AIP). The ARP serves as the principal Federal Aviation Administration (FAA) organization responsible for all airport program matters in airport design, construction, maintenance, operations and safety.

Duties

Serve as ADO point of contact, authoritative consultant, and technical expert for airport engineering.

Serve as subject matter expert (SME) on airport engineering, construction and design standards, and pavement design to assure currency and compliance of Regulations, Orders, etc. within assigned programs. Conduct workshops/training for Airports employees, sponsors and consultants on paving, design, and development issues related to the Airport Improvement Program.

Serve as the ADO expert for plans and specification reviews, compliance with FAA technical standards, and bidding and award concerns.

Represent management at high level technical meetings.

Interpret, communicate, promote awareness, and prepare briefings on new FAA Airports initiatives and statutory programs, and draft and newly approved policy and guidance.

Serve as the ADO Safety Management System (SMS) program manager and as the focal point for addressing safety and standards issues.

Serve as focal point for auditors from oversight agencies including the Office of Inspector General (OIG), Government Accountability Office (GAO) and others.

Represent the office at all runway safety meetings and make recommendations to management regarding funding allocations for any recommended runway safety projects.

Analyze and evaluate status/project closeout reports, findings, and recommendations from subordinate staff for technical compliance and alignment with project requirements, and in collaboration and/or negotiation with airport sponsors to resolve areas of conflict.

Review/coordinate with management Modification to Standards (MODs) request and forwards recommendation to FAA Headquarters for approval.

Evaluate and provide consolidated comments on draft policy.

Oversee the review and processing of aeronautical studies.

Coordinate with other FAA divisions regarding reimbursable agreements and projects that may affect a FAA facility or operation.

Provide technical direction, advice and guidance to all Civil Engineers/ Program Managers.

Collaborate with Federal, State and local officials, airport sponsor staff, consultants, airlines, FAA offices and other user groups to ensure development projects meet FAA regulations, standards and guidance.

Manage complex projects and is assigned work in support of engineering projects. Evaluate technical processes, to include recommending and updating Regional technical guidance.

Evaluate comments on engineering design drawings, specifications, construction safety, and phasing plans for compliance with established requirements.

Visit airports and current and proposed construction sites to observe construction progress and perform construction inspections. Determine solutions to problems encountered. Ensure acceptable levels of safety are provided and if necessary, provide guidance and professional assistance to bring an airport to standards.

Reviews and prepares correspondence for review by management including Congressional responses, briefing papers, approval letters and guidance to sponsors associated with all aspects of airport development.

Performs other duties as assigned.

Job Requirements:
Requirements Conditions of Employment
  • US Citizenship is required.
  • Selective Service Registration is required for males born after 12/31/1959.
  • Must submit an SF50 (See Required Documents).
  • This position has a positive education requirement. Transcript(s) required.
  • Bachelor's Degree in Engineering from an ABET Accredited School.
  • Successful completion of a security investigation will be required.
Qualifications

In addition to the basic requirement listed below in the EDUCATION section, to qualify for this position you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-I, FG/GS-13. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position.

Specialized experience should include: Experience in negotiating resolution on complex and/or controversial issues; Experience in airport design, pavement, and construction standards; Experience conducting technical training seminars and workshops; and Experience providing technical guidance to staff and representing management at high level technical meetings.

Qualification requirements must be met by the closing date of this vacancy announcement.

As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the initial application in the hiring process for all announcements. Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA.

In lieu of providing a KSA narrative response in the text box listed below each KSA, in your work history, please include information that provides specific examples of how you meet the response level or answer you chose for each KSA. Your work history examples should be specific and clearly reflect the highest level of ability. Your KSA answers will be evaluated further to validate whether the level that you selected is appropriate based on the work history and experience you provided. Your answers may be adjusted by a Human Resource Specialist as appropriate.

Eligible applicants meeting the minimum qualification requirements and selective factor(s), if applicable, may be further evaluated on the Knowledge, Skills and Abilities (KSA) listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories: score order, category grouping, or alphabetical and referred to the selecting official for consideration.


In addition to the minimum qualifications, the following has been determined to be a selective factor for this position. This means possession of this criterion is part of the minimum qualifications and is essential to perform the duties and responsibilities of this position. Applicants who do not possess this criterion are ineligible for further consideration.
  • Selective Place Factor - Demonstrated experience in airport design, construction standards and methods.


IMPORTANT: Ensure that your work experience supports your Knowledge, Skills and Abilities (KSA) answers. Your answers and associated work experience will be evaluated further to validate whether the answers that you selected are appropriate.
Education

This position has a positive education requirement: Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications. If selected, an official transcript will be required prior to appointment. You may upload these documents with your application in USAJOBS or fax it to fax number provided in the announcement (please include announcement number on each page).

Failure to do so will result in loss of consideration.

Schools must be accredited by an accrediting institution recognized by the U.S. Department of Education. Accreditation may be verified at the following website: www.ed.gov/accreditation.

Foreign education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered.

To qualify for this position, you must also have successfully completed a 4-year course of study in an accredited college or university leading to a bachelor's degree or higher in engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; OR (2) include differential and integral calculus and courses in 5 of the following 7 areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials; (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials; and (g) any other comparable area of fundamental engineering science or physics; OR a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering, demonstrated by one of the following: Current registration as a professional engineer; OR evidence of having successfully passed the Engineer-in-Training examination (EIT); OR successful completion of 60 semester hours of courses in physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements; OR successful completion of a curriculum leading to a bachelor's degree in engineering technology or appropriate professional field, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

How You Will Be Evaluated

You will be evaluated for this job based on how well you meet the qualifications above.



IMPORTANT: Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s). All answers provided in the on-line process must be substantiated. Ensure that your application package/resume supports your responses.

Required Documents

Supporting documents for applicants claiming eligibility under EVHO must be uploaded to Aviator or faxed to (404) 305-5401 by the closing date of this announcement. All submitted documents should reference the announcement number. If you are requesting consideration for any of the special hiring authorities, you must submit documentation from the 30% or More Disabled Veteran Program. You must submit a DD 214, Certificate of Discharge (Member 4 copy is preferred), and supporting documentation as required by form SF-15, such as an official statement, dated 1991 or later, from the Department of Veterans Affairs or from branch of the Armed Forces certifying to the present existence of the veteran's service-connected disability. Persons with Disabilities and Persons with Targeted Disabilities Appointment: You must provide proof of disability documentation (i.e. Schedule A Letter).It may be a letter or other documentation on official stationery/letterhead with an official signature. It should states that you are eligible for appointment under the PWD/PWTD hiring authority or a Schedule A appointment authority as outlined in 5 CFR Section 213.3102(u). No specifics needed.



Applicants claiming eligibility for the Expanded Veterans Hiring Opportunity (EVHO), MUST submit a DD Form 214 reflecting character of service to verify eligibility by the closing date of the announcement as requested by the Human Resource Office. Eligibility for EVHO will be considered based on applicable documentation submitted by the closing date.
This position has a positive education requirement; college transcripts are required for ALL candidates newly appointed to the FAA in the 0800 (Engineering) series.

College transcripts must be submitted from current FAA employees applying for internal vacancies if they have never held a position in the 0800 (Engineering) series with the FAA.

College transcripts are not required from current FAA employees who are currently occupying an 0800 (Engineering) series.

If selected, official transcripts are required prior to employment.

If you are a current or former Federal employee (including a current FAA employee), you MUST provide a copy of your SF-50 (Notification of Personnel Action) containing information in Blocks 15, 17, 18, 19, 22, and 24 so it can be used to verify your position title, series, grade, tenure, and organization of record by the closing date of the announcement. You may fax your SF-50 or upload it into the on-line application. If faxing the SF-50, please ensure you include the vacancy announcement number on the faxed copy.

If you are a current Federal employee and need a current copy of your SF-50, please contact your personnel office. If you are an FAA employee, you can access and print your SF-50 from the eOPF system https://eopf.opm.gov/dot/. If you are a former Federal employee, you can obtain a copy of your SF-50 by writing the National Personnel Records Center Annex, 1411 Boulder Boulevard, Valmeyer, IL 62295. Additional information is available from this link: https://www.archives.gov/st-louis/opf.

Expanded Veterans Hiring Opportunity (EVHO) are preference eligibles and veterans who are honorably discharged from the Armed Forces after completing at least three (3) years of continuous active service. Applicants claiming eligibility for EVHO, MUST submit a DD Form 214 reflecting character of service to verify eligibility by the closing date of the announcement as requested by the Human Resource Office. Eligibility for EVHO will be considered based on applicable documentation submitted by the closing date.

If you are relying on your education to meet qualification requirements:

Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Company Details
Federal Aviation Administration
800 Independence Ave, SW
Washington, DC 20591 USA
www.faa.gov/jobs
493 Open Jobs Available
Our continuing mission is to provide the safest, most efficient aerospace system in the world. We strive to reach the next level of safety, efficiency, environmental responsibility and global leadership. We are accountable to the American public and ...

Benefits:
TBD
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)
Job Info
Location
Jackson, Mississippi, United States
Type
Contractor
Salary Range
$108,601 - $168,362
Company Details
Federal Aviation Administration
800 Independence Ave, SW
Washington, DC 20591 USA
www.faa.gov/jobs
493 Open Jobs Available
Our continuing mission is to provide the safest, most efficient aerospace system in the world. We strive to reach the next level of safety, efficiency, environmental responsibility and global leadership. We are accountable to the American public and ...

Benefits:
TBD

JSfirm, LLC

Roanoke, TX

jobs@jsfirm.com

JSfirm LLC, Privacy Policy

All rights reserved. 2001-2024 JSfirm