Electronics Engineering SME (CCA, FPGA, Full Life Cycle)
Lockheed Martin •
Position Type: Permanent
Job Description:
Description:Circuit Design Engineer - Level 6
We are Lockheed Martin
The Electronic Hardware Design (EHD) team develops flightworthy safety critical electronic hardware, embedded software, FPGAs, and test equipment for LM Aero aircraft programs and related needs. We are a co-located team of electrical, mechanical, software, test, and project management engineers under one manager. These EHD disciplines develop requirements, produce detailed designs, qualify, document, develop test equipment for, and establish production build to print suppliers for the products it develops.
Responsible for the development and verification of flightworthy safety critical electronic circuit cards, FPGAs, and related test equipment. Will work closely with embedded software engineers, mechanical engineers, specialty engineering, and test engineers integrating the software, hardware, and test stations. May also develop automated test capabilities enabling hardware and software verification.
Responsible for leading development of electronic hardware architecture, circuit design, layout and mask design, device evaluation and characterization, test box design, prototype construction and checkout.
Prepares test methods and specifications. Analyzes equipment to establish operating data and conducts experimental tests.
Qualifies hardware against requirements. Authors design documentation, test reports, technical analysis.
Provides finished device approval and prepares qualification documentation.
Leads and develops a team accomplishing these responsibilities.
Improves team processes and toolsets.
Provides consultation to struggling LM Aero electronic hardware suppliers to improve project performance and resolve technical issues. Frequent travel may be required
Help LM Aero develop fully qualified flightworthy electronics at a greatly reduced cost and schedule enabling company to meet increasing customer demands to keep up with adversaries.
Frequent Travel may be required
What’s In It For You: 3 day weekends every weekend!
From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin’s comprehensive benefits package here.
Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus -if you have the passion and courage to dream big, work hard, and have fun doing what you love then we want to build a better tomorrow with you.
Who You Are
You are a multi-faceted teammate able to communicate and function effectively on an engineering team to create a collaborative and inclusive environment that allows for the establishment of mission goals. Self-motivated and inspired, you thrive in an environment where you are empowered to work your craft, never settling for the bare minimum.
Our Commitment to DEI
We Hear You, We See You. At LM Aeronautics, we invest in people and promoting the sharing of ideas to create incredible solutions. We know that our success depends on the combined efforts of diverse-thinkers like you! At LM Aeronautics, we cultivate an inclusive environment that appreciates differences and unique thinking.
Our global commitment to diversity and inclusion reflects our values of doing whats right, respecting others and performing with excellence. Learn more here: Global DEI.
* Must be a US Citizen
Basic Qualifications:
Bachelors degree in Electrical Engineering or Related Degree
Demonstrated experience in circuit design
Demonstrated experience Circuit Card Assembly Design and/or Evaluation
Demonstrated experience in FPGA Development and/or Verification
Desired Skills:
Experience using Xilinx and/or Microsemi FPGAs
Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
Experience with Perl, Visual Basic, and C/C++,
DO 178C/254 verification
High Speed and RF design
Cadence schematic capture, PCB layout Allegro
Atlassian Tools (Jira, Bitbucket, Confluence)
Strong Written and Oral Communication Skills
Aerospace Product Development Experience
Agile Development Experience
Technical requirement development, decomposition, verification experience
Verification of aerospace electronic hardware and embedded software requirement expertise
System level integration experience
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Pay Rate:
The annual base salary range for this position in California and New York (excluding most major metropolitan areas), Colorado, Hawaii, Washington or Washington DC is $153,200 - $293,600. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidates work experience, education/ training, key skills as well as market and business considerations when extending an offer.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.
(Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year.
This position is incentive plan eligible.
Pay Rate:
The annual base salary range for this position in most major metropolitan areas in California and New York is $176,200 - $331,900. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/ training, key skills as well as market and business considerations when extending an offer.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.
This position is incentive plan eligible.
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.
As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Experience Level: Experienced Professional
Business Unit: AERONAUTICS COMPANY
Relocation Available: Yes
Career Area: Electrical Engineering
Type: Full-Time
Shift: First
Experience using Xilinx and/or Microsemi FPGAs
Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
Experience with Perl, Visual Basic, and C/C++,
DO 178C/254 verification
High Speed and RF design
Cadence schematic capture, PCB layout Allegro
Atlassian Tools (Jira, Bitbucket, Confluence)
Strong Written and Oral Communication Skills
Aerospace Product Development Experience
Agile Development Experience
Technical requirement development, decomposition, verification experience
Verification of aerospace electronic hardware and embedded software requirement expertise
System level integration experience
Job Ident #:
63203240480
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)