Job Title:  Tool DesignerDuration:  1 Year Contract Position / 12 Month ContractLocation:  Torrance, CAWork Status:  United States Citizen Or Permanent Resident / Green Card HolderWork Hours:  First Shift Position / 1st Shift Job Opening / Day Time Hours – 40 Hours Per WeekEducation:  A.S. Degree /
JSfirm
Tool Designer
Job Description:
Job Title:  Tool Designer
Duration:  1 Year Contract Position / 12 Month Contract
Location:  Torrance, CA
Work Status:  United States Citizen Or Permanent Resident / Green Card Holder
Work Hours:  First Shift Position / 1st Shift Job Opening / Day Time Hours – 40 Hours Per Week
Education:  A.S. Degree / Associate’s Degree OR 2 Years Of Technical School Training.
Pay:  $40.00 Per Hour On A W2 Contract Pay Rate.
Projected Start Date:  Monday, March 04, 2019 (TBD).
# Of Job Openings – 1 Position Available At This Time.
# Of Years Of Experience Preferred – 3 to 5 Years Of Experience Is Highly Preferred.
Job Summary – Under the general direction of the Manufacturing Engineering Group Leader or Manufacturing Project Engineer, designs (layout and detailing) tooling, jigs and fixtures, gages, and test equipment for the most economical production and test of the products. Maintains contact with the Tool Room, Method Engineers, outside vendors and operating departments regarding the ability to manufacture and use of items designed.
Job Functions - This position is concerned with the design of tools, jigs, fixtures, and gages which are used to manufacture and test items produced by the company.  Most items are requested by Methods Engineers, however, requests also come from other engineering areas when items are needed for prototype, assembly, test, or in development of the company products. The incumbent frequently must obtain additional information from all available sources to effectively accomplish the design. On major projects, the requesting party frequently performs design calculations and functionally checks the results. On all designs, the incumbent is expected to check his own work dimensionally. Layouts may be approved by the supervisor as required before detailing.
The incumbent is expected to work closely with the methods engineers, toolroom employees and supervisors where the items designed are made and used. The incumbents effectiveness is measured by the amount of changes required and trouble experienced in building the item; the comments of the toolmaker, inspector, and user; and the ability of the item to perform its function.
Accountabilities –
1. Designs, lays out, details and checks (dimensionally) tooling and gauges assigned by the
supervisor.
2. Follows up on the manufacture of items designed and their ability to perform as intended.
3. Works with Method Engineers, Supervision, Metrology and users to assure optimum design.
4. Makes recommendations for changes in part drawings to improve manufacturing and/or
performance.
5. Assure the acceptance and practice of fundamental safety principles by employees and management.
6. Develops standard tool designs for expediency.
7. Utilizes new graphics systems to streamline tool design tasks.
Required Skills - In order to perform this position, the incumbent must have a working knowledge of precision machine shop practices; cutting tools, jig and fixture construction, gauging practices and assembly and testing practice. This normally would be a result of two years' technical school training (or equivalent experience), tool and diemaking or machine shop experience, and at least 5 years tool design experience. A knowledge in gear manufacturing and mechanical actuation is desirable.
As a result of the incumbent's duties and contacts, one should have the ability to get along with many people. It is also expected that in performing this job, one will make recommendations for improvement on part drawings and manufacturing techniques. Since much of this work is not directly supervised, the incumbent expected to keep the supervisor informed of all activities.
Education - A.S. Degree / Associate’s Degree OR 2 Years Of Technical School Training.
Other Requirements –
Has to be currently doing tool designs.
Five year minimum in tool designs, for Aerospace/Mechanical applications.
No Design Engineering candidates, only Tool designers.
Incumbant has to be using NX 10 and Teamcenter . Unfortunately, we cannot afford the time to train in NX10.
Job Requirements:
Job Title:  Tool Designer
Duration:  1 Year Contract Position / 12 Month Contract
Location:  Torrance, CA
Work Status:  United States Citizen Or Permanent Resident / Green Card Holder
Work Hours:  First Shift Position / 1st Shift Job Opening / Day Time Hours – 40 Hours Per Week
Education:  A.S. Degree / Associate’s Degree OR 2 Years Of Technical School Training.
Pay:  $40.00 Per Hour On A W2 Contract Pay Rate.
Projected Start Date:  Monday, March 04, 2019 (TBD).
# Of Job Openings – 1 Position Available At This Time.
# Of Years Of Experience Preferred – 3 to 5 Years Of Experience Is Highly Preferred.
Job Summary – Under the general direction of the Manufacturing Engineering Group Leader or Manufacturing Project Engineer, designs (layout and detailing) tooling, jigs and fixtures, gages, and test equipment for the most economical production and test of the products. Maintains contact with the Tool Room, Method Engineers, outside vendors and operating departments regarding the ability to manufacture and use of items designed.
Job Functions - This position is concerned with the design of tools, jigs, fixtures, and gages which are used to manufacture and test items produced by the company.  Most items are requested by Methods Engineers, however, requests also come from other engineering areas when items are needed for prototype, assembly, test, or in development of the company products. The incumbent frequently must obtain additional information from all available sources to effectively accomplish the design. On major projects, the requesting party frequently performs design calculations and functionally checks the results. On all designs, the incumbent is expected to check his own work dimensionally. Layouts may be approved by the supervisor as required before detailing.
The incumbent is expected to work closely with the methods engineers, toolroom employees and supervisors where the items designed are made and used. The incumbents effectiveness is measured by the amount of changes required and trouble experienced in building the item; the comments of the toolmaker, inspector, and user; and the ability of the item to perform its function.
Accountabilities –
1. Designs, lays out, details and checks (dimensionally) tooling and gauges assigned by the
supervisor.
2. Follows up on the manufacture of items designed and their ability to perform as intended.
3. Works with Method Engineers, Supervision, Metrology and users to assure optimum design.
4. Makes recommendations for changes in part drawings to improve manufacturing and/or
performance.
5. Assure the acceptance and practice of fundamental safety principles by employees and management.
6. Develops standard tool designs for expediency.
7. Utilizes new graphics systems to streamline tool design tasks.
Required Skills - In order to perform this position, the incumbent must have a working knowledge of precision machine shop practices; cutting tools, jig and fixture construction, gauging practices and assembly and testing practice. This normally would be a result of two years' technical school training (or equivalent experience), tool and diemaking or machine shop experience, and at least 5 years tool design experience. A knowledge in gear manufacturing and mechanical actuation is desirable.
As a result of the incumbent's duties and contacts, one should have the ability to get along with many people. It is also expected that in performing this job, one will make recommendations for improvement on part drawings and manufacturing techniques. Since much of this work is not directly supervised, the incumbent expected to keep the supervisor informed of all activities.
Education - A.S. Degree / Associate’s Degree OR 2 Years Of Technical School Training.
Other Requirements –
Has to be currently doing tool designs.
Five year minimum in tool designs, for Aerospace/Mechanical applications.
No Design Engineering candidates, only Tool designers.
Incumbant has to be using NX 10 and Teamcenter . Unfortunately, we cannot afford the time to train in NX10.
Company Details
Butler Aerospace & Defense
4960 Corporate Drive
Huntsville, Alabama 35805 USA
butler.com/
238 Open Jobs Available
Solutions Provider! Butler America combines over 60 years of technical services with 21st-century management tools, culture, and business solutions to match the best talent with the best jobs.

Benefits:
We offer full Medical, Dental & Vision plans.

Supported Manufacturers:
Engineering, Telecom, Skilled Labor,IT, Aviation & Aerospace. BAE, UTC, Sikorsky, Rockwell Collins

Supported Models:
C-130 (all models),T44A, T34C, all models of Sikorsky helicopters.
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)
Job Info
Location
Torrance, California, USA
Type
Contractor
Relocation
None
Travel
None
Salary Range
$0.00 / HOUR - 40.00 / HOUR
Company Details
Butler Aerospace & Defense
4960 Corporate Drive
Huntsville, Alabama 35805 USA
butler.com/
238 Open Jobs Available
Solutions Provider! Butler America combines over 60 years of technical services with 21st-century management tools, culture, and business solutions to match the best talent with the best jobs.

Benefits:
We offer full Medical, Dental & Vision plans.

Supported Manufacturers:
Engineering, Telecom, Skilled Labor,IT, Aviation & Aerospace. BAE, UTC, Sikorsky, Rockwell Collins

Supported Models:
C-130 (all models),T44A, T34C, all models of Sikorsky helicopters.

JSfirm, LLC

Roanoke, TX

jobs@jsfirm.com

JSfirm LLC, Privacy Policy

All rights reserved. 2001-2024 JSfirm