Workshop Technician
Safran •
Position Type: Permanent
Job Description:
Duties and Responsibilities:
- To carry out repair, test, service all Units of shop Equipment is under company approved capability
list as per manufacturers procedures whilst observing all safety procedures charging/servicing as required.
- To carry out any component changes as a necessary part of the troubleshooting process and as directed
by immediate supervisor or certifying staff. This will include the ability to obtain and understand
- Component Maintenance Manual (CMM), Illustrated Parts List (IPL), or other vendor documentation required to carry out this task.
- To determine that any tooling used is serviceable and appropriate for the task and to understand and use specialized tooling where required.
- Participate and promote in creating a safety culture in an effort to minimize accidents and highlight deficiencies/failures that can lead to such accidents. Ensure all work locations are kept clean and excellent housekeeping conditions are maintained. This includes being aware and communicating safety shortfalls.
- To avoid FOD will be vigilant in ensuring work areas, lockers, test benches and toolboxes are all kept clean.
- Creation of shop finding report, Create Part requisition / Bill of material through M3.
- To control and maintain proper records of all inspections/ repair documents/testing of every component worked on.
- Ensure to carry out all Applicable Document for the repaired unit (SB, SIL, AD and / or RD) in order to ensure flight safety and fill all applicable work packages correctly.
- Review and maintain the assigned Storage unit content list in daily basis and control The THP sheet as per company policy.
- Report any discrepancies report / occurrences report as per company producers and our regulatory instructions.
- Maintain Quality standards and attendance to be maintained.
Job Requirements:
Familiarization with EASA/GCAA/FAA part 145 certification
requirements, rules and Regulation.
Knowledge of safety risks linked to the working environment.
Knowledge of human factors, human performance and limitations
Ability to report discrepancies.
Ability to use, control and be familiar with required tooling and/or
equipment.
Knowledge of the following Aircraft C rating : C18, C17, C6, C5, C1 and
C6
Technical Skill including Computers (MS Office, Excel, Windows) and
usage of measurement test Equipment's
Job Ident #:
147548
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)